Zahid Brothers HVAC
Call / WhatsApp0334-8448441 Call 0334-8448441

04 / 10HVAC ductwork

Ducting work in Lahore: HVAC duct design, fabrication and installation.

Good ductwork moves air quietly and evenly to every room. Zahid Brothers designs, fabricates, insulates and installs HVAC ducting for air conditioning, ventilation, kitchen exhaust and air coolers. We fabricate GI ducting in our own workshop, supply the grilles, diffusers and dampers, and repair or clean old ductwork. We have done this for 25+ years in Lahore and across Punjab.

Book a site survey or call 0334-8448441.

Experience
25+ years
What we do
Design, fabricate, insulate, install, repair, clean
Ducting for
AC, ventilation, kitchen exhaust, air coolers
Coverage
Lahore and across Punjab
What we do

What our ducting work covers.

  1. 01

    Design.We visit the site and plan the duct routes and sizes for the air the system has to move.

  2. 02

    GI duct fabrication.We make rectangular GI ducts and fittings in our own workshop, to the sizes the job needs.

  3. 03

    Insulation.We insulate the ducts that carry cooled air, so they don't sweat and the cooling isn't lost on the way.

  4. 04

    Installation.We fix the ducts, then connect the grilles, diffusers and dampers that we supply.

  5. 05

    Repair and cleaning.We repair, replace and clean old ductwork, including ducting other companies installed.

Duct types

Duct types we install.

  • 01

    Rectangular GI duct

    Made from galvanised iron (GI) sheet and fits neatly above false ceilings. It is the most common duct for air conditioning ductwork in offices, shops and homes.

  • 02

    Spiral round duct

    Round, rigid duct with a spiral seam. It is strong and has few joints, so it suits long runs, exposed ceilings and ventilation ducts.

  • 03

    Flexible air duct

    Flexible ductwork makes the short connection between the main duct and each diffuser, where a rigid duct would be hard to fit. Flex ductwork should be kept short and straight so the air flows freely.

Done properly

What good HVAC ductwork needs.

  • 01

    Ducts sized for the air each room needs, so the air arrives evenly and without noise.

  • 02

    Galvanised (GI) sheet that resists rust, in the right thickness for the duct size.

  • 03

    Joints that don't leak, so the cooled air reaches the rooms instead of the ceiling space.

  • 04

    Insulated supply ducts, so they don't drip on ceilings and the air stays cool.

  • 05

    To control and spread the air in each room.

Compare

Rectangular vs spiral round duct.

Rectangular GI ductSpiral round duct
ShapeFlat, fits shallow ceiling spacesRound, needs more depth
AirflowGoodSmooth, with less resistance
JointsMore joints and seamsFewer joints
LooksUsually hidden above a false ceilingNeat enough to leave exposed
Best forAC ducting above false ceilingsLong runs, exposed ceilings and ventilation
Applications

Ducting for every kind of system.

  • 01 · AC

    AC ducting

    Ducting for ducted AC units, VRF ducted indoor units and AHUs and FCUs, carrying cooled air to every room from units hidden above the ceiling.

  • 02 · VENT

    Ventilation ducts

    Ducting for fresh air and extraction in offices, factories, basements and parking areas. See our ventilation systems.

  • 03 · EXHAUST

    Kitchen exhaust ducting

    Ducting that takes smoke, heat and grease from kitchen hoods out of restaurants, hotels and commercial kitchens.

  • 04 · COOLER

    Air cooler ducting

    Ducting that spreads the air from large air coolers across factories, warehouses and halls. See our evaporative coolers.

Repairs

Duct repair, replacement and cleaning.

Old ducting can leak air, drip water from worn insulation, rattle, or collect dust that blows into the rooms. We check the ductwork, repair or replace the damaged sections and insulation, and clean the ducts, whoever installed them.

OUR PROCESS

From site visit to after-sales support.

  1. 01

    Site visit:we check the building, the units and where the ducts can run.

  2. 02

    Design:duct routes, sizes and outlet positions planned.

  3. 03

    Fabrication:GI ducts and fittings made in our workshop.

  4. 04

    Installation:ducts fixed, insulated and connected to the grilles, diffusers and dampers.

  5. 05

    Handover:the system is run and checked before handover.

  6. 06

    After-sales support:repairs and duct cleaning whenever you need them.

FAQ

Ducting questions we often get.

Ask us on WhatsApp →

Ducting is the network of metal channels that carries air from the AC or air handling unit to each room, and back again. Grilles and diffusers at the end of each duct spread the air into the room.

GI ducting is made from galvanised iron sheet, which is coated with zinc so it doesn't rust. It is the standard material for HVAC ductwork.

Yes. We fabricate GI ducts and fittings in our own workshop, so they are made to the sizes your site needs.

For short connections from the main duct to each diffuser. Long runs should use rigid GI or spiral duct, because flexible duct slows the air over long distances.

Uninsulated ducts carrying cooled air sweat and drip on ceilings, and the air warms up before it reaches the room, so the AC has to work harder.

Yes. We make and install ducting for air coolers in large spaces and for kitchen exhaust hoods.

Yes. We repair, replace and clean old ductwork whoever installed it.

Yes. Our office is on Main College Road, near Butt Chowk, Township, Lahore, and we work across Punjab.

Need ducting designed, installed or repaired?

Tell us about your building and what the ducting is for. We'll visit your site, plan the duct routes and take the job from fabrication to handover. Book a site survey or call 0334-8448441.

Book a survey Call 0334-8448441